Qnap TS-470

Qnap TS-470

Hardware specification
CPU Intel 2.6GHz Dual-core Processor
DRAM 2GB SO-DIMM RAM
Flash Memory 512MB DOM
Hard Disk Drive
4 x 3.5” or 2.5” SATA 6Gb/s, SATA 3Gb/s hard drive or SSD

NOTE:
The system is shipped without HDD.
For the HDD compatibility list, please visit http://www.qnap.com/compatibility
Hard Disk Tray 4 x Hot-swappable tray with key lock
LAN Port
4 x Gigabit RJ-45 Ethernet port (2 ports are provided by the included PCI-E NIC);
Optional dual-port 10 GbE NIC support by replacing the dual-port GbE PCI-E NIC
For the information of network card installation, please refer to chapter 6 in the Turbo NAS Hardware Manual.
LED Indicators Status, USB, LAN, HDD 1 - 4

USB
2 x USB 3.0 port (rear)
3 x USB 2.0 port (front: 1, rear:2)
Support USB printer, pen drive, USB hub (front), and USB UPS etc.
eSATA 2 x eSATA port (rear)
HDMI HDMI x 1
Audio Out 1 (Supported application: Music Station, HD Station)
Audio In 1 (reserved)
Buttons Power, Reset, USB One Touch Backup
Alarm Buzzer System warning

LCD Pane l Mono-LCD display with backlight, Enter and Select buttons for configuration
Secure Design K-lock security slot for theft prevention
Fan 1 x quiet cooling fan (9 cm, 12V DC)
PCI-E Slot 1, with dual-port GbE NIC pre-installed (for optional 10GbE network expansion)
Form Factor Tower
Dimensions
177 (H) x 180 (W) x 235 (D) mm
6.97 (H) x7.09 (W) x 9.25 (D) inch

Weight Net weight:4.56 kg (10.05 lbs)
Gross weight: 5.7 kg (12.57 lbs)
Power Consumption (W)
Sleep mode: 23.9W
In Operation: 38.4W
Power-off (in WOL mode): 1W
(with 4 x 500GB HDD installed)
Temperature 0-35°C
Humidity 5~95% RH, wet bulb:23C

Power Supply
Input: 100-240V AC, 50/60Hz, Output: 250W