NE Mr. Connect IAD 162, VoIP

Introduction The IAD 161 is a one-port telephone extension and three ports SOHO Router to IP network gateway. It provides Data transfer by 10/100Mbps, telephone services and T.38 fax over IP network with easily operation and configuration. It is most suitable for SOHO and small-to-medium enterprise in Internet communication environment. The IAD 161/ 162 also connects three computers without another IP sharing. But the IAD 162 provides two telephone numbers that one is IP telephone number and another is PSTN telephone number in one device for end users. User can make phone call via Internet or PSTN in one telephone set now. No more long distance and international telephony fee! Especially, User still can make phone call when external power is failure. Multiple Advantages Built-in NAT/IP sharing function PSTN backup: user still can make phone call when external power is failure (for IAD162 only) Provide both IP telephone number and PSTN telephone number in one device for end users (for IAD162 only) Cost Saving - Telephone call from VPN or public Internet Follows the existing telephone call dial plan The plastic housing can be adjustable by manual (Vertical type or Horizontal type) Specification Protocol ITU-T H.323 v2/v3/v4 compliance SIP RFC3261 Supplementary service H.450 (Call Hold, Call Transfer, Call forward) FAX support Automatically FAX detection Support T.38 protocol Codec G.711A/µ-law, G.723.1, G.729A Network Interface Three 10/100Base-T Ethernet RJ-45 ports (auto LAN MDI/MDIX) One WAN port FXS Interface One RJ-11 Telephone port (FXS) One PSTN port (for IAD162 only) Voice Quality VAD (Voice Activity Detection) CNG (Comfort Noise Generation) G.165/G.168 compliant echo cancellation Programmable Dynamic Jitter Buffer Bad Frame Interpolation Provide both in-band and out of band DTMF generation/detection Gain/Attenuation Settings G.165/G.168 compliant echo cancellation Provide Progress Tone: Dial tone, busy tone, 2nd dial tone, call-holding tone and ring-back tone QoS TOS Caller ID Generation (FSK) Tone DTMF / CPT (Call Progress Tone) generation/detection TCP/IP Support Fixed IP and DHCP ADSL Environment PPPoE Security Support H.235 security function Configuration & management TELNET, Web Browser and Welltech "installation wizard" Upgrade Firmware upgrade through network by TFTP/FTP Power Input AC 100V~240V Output DC12V Certification FCC Part 15, CE Class B, LVD Operation Temp 5° C to 40° C Humidity 10% to 90% (Non-condensing) Chassis Dimension: 190mm(H) x 110mm(W) x 51.5mm(D) for IAD 162 vertical type Weight (unit): 0.3 kg