MSI K9A2 CF-F - AMD 790X, AM2+, DDR2, GLAN, SATA2, CF, RAID, ATX

CPU • AMD® Phenom/Athlon/Sempron CPU. FSB • HyperTransport 3.0 supporting speed up to 2600MHz - AM2 CPU supports HyperTransport 1.0 - AM2+ CPU supports HyperTransport 3.0 Chipset • AMD® 790X and SB600 Chipset Main Memory • Supports Dual DDR II 533/667/800/1066(only for AM2+) - 4 DDRII DIMMs (240pin / 1.8V) - Supports a maximum memory size up to 8GB. Slots • 1 mazarine PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V1.0a compliant) • 1 light-blue PCI Express x16 slot with x8 operation (PCI Express Bus SPEC V2.0 compliant) • When 2 PCI Express x16 slots are all installed, the PCIE x 16 lanes will auto arrange form x16/ x0 to x8/ x8. Do not use the light-blue slot when only one PCI Express x16 card is installed. • 1 PCI Express x1 slots • 2 PCI slots, support 3.3V/ 5V PCI bus Interface. On-Board IDE • One IDE port by AMD® SB600 - Supports Ultra DMA 66/100/133 mode - Supports PIO, Bus Master operation mode - Can connect up to two IDE devices On-Board SATA • 4 SATA II (1~4) ports by AMD® SB600 • 1 eSATA port by Silicon Image® Sil3531 (optional) - Supports storage and data transfers at up to 300 MB/s RAID Function - SATA II 1~4 support RAID 0, 1 and 0+1 mode by AMD® SB600 Audio • Chipset integrated by Realtek® ALC888 - Flexible 8-channel audio with jack sensing - Compliant with Azalia 1.0 Spec LAN • Realtek PCI-E GbLAN controller 8111B - Integrated Fast Ethernet MAC and PHY in single chip - Supports 10Mb/s, 100Mb/s and 1000Mb/s - Compliance with PCI-Express Bus specification v1.0a IEEE1394 • Chipset integrated by VIA® VT6308P - Transfer rate is up to 400Mbps Internal I/O Connectors - ATX 24-pin power connector - ATX 4-pin 12V CPU power connector - CPU / System x 2 FAN connectors - CD-in connector - Front panel audio connector - Front panel connector - Chassis intrusion switch connector - 3 x USB 2.0 connector support additional 6 ports - 1 x Floppy disk drive connector - 4 x Serial ATA II connectors - 1 x ATA133 HD connectors - Clear CMOS jumper - 1 x SPDIF-out header (optional, for HDMI graphic card only) - 1 x IEEE1394 connector support additional 1 ports (optional) - 1 x TPM module header (optional) Back Panel I/O Ports - 1 x PS/2 keyboard - 1 x PS/2 mouse - 1 x Serial port - 1 x 6 in 1 audio jack - 4 x USB 2.0 ports - 1 x RJ45 LAN jack - 1 x eSATA port (optional) - 1 x IEEE1394 Port (optional)