Gigabyte P67A-UD4 P67 s1155,DDR3, SATA3, USB3.0, GLAN, PCIE2.0, ATX

Základní deska s novým čipsetem P67 (9.1.2011) pro osazení novými CPU Intel Sandy Bridge do socketu LGA1155.

Inovativní 12ti fázové napájecí obvody zajišťují maximální efektivitu distribuce energie
Technologie Ultra Durable 3 s měděnými chladiči zajišťující nižší provozní teploty
Podpora USB 3.0 s extrarychlým přenosem dat - teoreticky až 5 Gbps
GIGABYTE 3x USB Power - možnost využít USB porty pro nabíjení např MP3 přehrávačů i pokud je PC vypnuté
Podpora SLI a CrossFireX - zapojení 2 grafických karet pro maximální navýšení výkonu
Technologie XHD, ktará automaticku akceleruje výkon pevných disků
Podpora Dolby Home Theater audio
GIGABYTE DualBIOS™ - nejvyšší úroveň ochrany BIOSu

Paměť:
1.4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
2.Dual channel memory architecture
3.Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
4.Support for non-ECC memory modules
5.Support for Extreme Memory Profile (XMP) memory modules

Sloty:
1.1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
2.1 x PCI Express x16 slot, running at x8 (PCIEX8) * The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode.
3.3 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 standard.)
4.2 x PCI slots

Disková rozhraní:
Chipset:
1.2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
2.4 x SATA 3Gb/s connectors (SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 4 SATA 3Gb/s devices
3.Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

Marvell 88SE9128 chip:
1.2 x eSATA 6Gb/s connectors on the back panel supporting up to 2 SATA 6Gb/s devices
2.Support for SATA RAID 0 and RAID 1

Interní konektory:
1.1 x 24-pin ATX main power connector
2.1 x 8-pin ATX 12V power connector
3.2 x SATA 6Gb/s connectors
4.4 x SATA 3Gb/s connectors
5.1 x CPU fan header
6.2 x system fan headers
7.1 x power fan header
8.1 x front panel header
9.1 x front panel audio header
10.1 x S/PDIF Out header
11.3 x USB 2.0/1.1 headers
12.1 x USB 3.0/2.0 header
13.1 x serial port header
14.1 x clearing CMOS jumper

Zadní panel:
1.1 x PS/2 keyboard/mouse port
2.1 x coaxial S/PDIF Out connector
3.1 x optical S/PDIF Out connector
4.8 x USB 2.0/1.1 ports
5.2 x USB 3.0/2.0 ports
6.2 x eSATA 6Gb/s ports
7.1 x RJ-45 port
8.6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)

Podporovane CPU: http://www.gigabyte.com/support-downloads/cpu-support-popup.aspx?pid=3648

Více informací naleznete na: http://www.gigabyte.com/products/product-page.aspx?pid=3648#ov